diff --git a/kernel-build/patches/004-mochabin-mpcie-usb3-superspeed.patch b/kernel-build/patches/004-mochabin-mpcie-usb3-superspeed.patch
deleted file mode 100644
index 8a8eb82e..00000000
--- a/kernel-build/patches/004-mochabin-mpcie-usb3-superspeed.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From: Gerald Kerma <devel@cybermind.fr>
-Subject: [PATCH] arm64: dts: marvell: mochabin: route SerDes lane 5 to USB3 SuperSpeed on mPCIe slot
-
-The MOCHAbin mPCIe slot J5 ships from Globalscale wired as :
-
-  - PCIe x1 on SerDes lane 5 (cp0_pcie2)
-  - USB 2.0 on UTMI (cp0_usb3_1, no SerDes)
-  - I2C1
-
-Per the official MOCHAbin block diagram (provided by Globalscale after
-the SCO request) the slot is sized for a "2x2 WiFi 802.11/ax BT5.1"
-card. WiFi 6 chipsets in this segment (e.g. MT7921 family) are
-predominantly **USB 3.0** rather than PCIe.
-
-A hardware modification (SerDes lane 5 retargeted from PCIe to USB3
-SuperSpeed on the mPCIe USB pins) has been applied to the test board.
-The kernel must now reflect that reroute :
-
-  1. cp0_pcie2 has no SerDes anymore — disable the controller so the
-     armada8k-pcie driver doesn't loop on "Phy link never came up".
-  2. cp0_usb3_1 must declare cp0_comphy5 in mode 5 (PHY_TYPE_USB3_HOST1)
-     alongside the existing UTMI binding from patch 003. This gives
-     the slot full USB 3.0 5 Gbps SuperSpeed + USB 2.0 fallback.
-
-Pattern mirrors cp0_usb3_0 (USB3 HUB on comphy1 mode 4 PHY_TYPE_USB3_HOST0)
-which is the only USB3 host that works on stock MOCHAbin.
-
-After this patch, plugging an MT7921U-class card in J5 should enumerate
-on USB3 with the chip wired for 2x2 5 Gbps throughput — matching the
-official block-diagram intent of the slot.
-
-Note: this supersedes patch 003 (USB2 baseline) for boards that have
-received the SerDes-5 USB3 modification. Boards still in stock
-configuration should ship with 003 only. A future per-board profile
-will gate which patches apply.
-
-Closes: #463
-Signed-off-by: Gerald Kerma <devel@cybermind.fr>
-
---- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
-@@ -422,12 +422,28 @@
- 	phy-names = "cp0-usb3h0-comphy", "utmi";
- };
-
--/* miniPCI-E USB */
-+/* miniPCI-E USB — slot J5
-+ *
-+ * Hardware-modded board : SerDes lane 5 retargeted from PCIe to USB3
-+ * SuperSpeed on the mPCIe USB pins. cp0_pcie2 is now disabled (see
-+ * the &cp0_pcie2 override below). cp0_usb3_1 binds both UTMI (USB 2.0
-+ * baseline from patch 003) AND cp0_comphy5 mode 5
-+ * (PHY_TYPE_USB3_HOST1) for SuperSpeed. The slot becomes USB 3.0
-+ * 5 Gbps capable for MT7921-class WiFi 6 cards per the official
-+ * MOCHAbin block diagram.
-+ */
- &cp0_usb3_1 {
- 	status = "okay";
-
--	phys = <&cp0_utmi1>;
--	phy-names = "utmi";
-+	phys = <&cp0_comphy5 5>, <&cp0_utmi1>;
-+	phy-names = "cp0-usb3h1-comphy", "utmi";
- 	dr_mode = "host";
- };
-
-+/* SerDes lane 5 retargeted to USB3 — PCIe controller has no PHY left. */
-+&cp0_pcie2 {
-+	status = "disabled";
-+};
-+
- &cp0_sata0 {